Industrial glue Request a quote

Industrial Adhesive Glue

Industrial Strength Adhesive Glue , polyurethane adhesive 917 for engineering machinery

Industrial Strength Adhesive Glue , polyurethane adhesive 917 for engineering machinery

Product Details:

Place of Origin: China
Brand Name: Huitian
Certification: ROHS/UL/SGS
Model Number: 917

Payment & Shipping Terms:

Minimum Order Quantity: 5000 pcs
Price: Negotiation
Packaging Details: 90 g/tube, 20 pc/carton
Delivery Time: 15 working days after received your payment
Payment Terms: T/T, Western Union
Supply Ability: 3000000 0pcs per month

Product details

Detail Information

Product Name: Industrial Adhesive Glue Color: Black
Density G/cm3(25℃): 1.85 Touch Curing(min): 40
Tensile Strength: 6 ≥ 5 Elongation At Break: 500 ≥ 450
Tear Strength KN/m: 25 ≥ 20 The Shear Strength Of /MPa: 4 ≥ 3
Harness: Shore-D: 50-65 Work Temperature℃: -40~90
High Light:

industrial epoxy adhesive


rtv silicone sealant

Product Description

Huitian Industrial Adhesive Glue , polyurethane adhesive 917 for engineering machinery

Huitian polyurethane adhesive 918A

HT918A is a single component, black, low viscosity, high strength, low odor polyurethane adhesive. Cured adhesive is elastomers, anti cold and hot change, good resistance to stress change performance.

Typical use

Assembly adhesive used for engineering machinery, automobile, shipbuilding and other cab windshield, and the bonding part of the metal structure of the seal.

Characteristic before curing

Representative value range

A component

Color Black

Density g/cm3(25℃) 1.85 1.15~1.25


Touch Curing(min) 40 20~60



Characteristic after curing

Tensile strength (MPa 6 ≥ 5


Elongation at break (%) 500 ≥ 450


Tear strength KN/m 25 ≥ 20

(GB/T 529)

The shear strength of /MPa 4 ≥ 3

(GB/T 7124)

Harness: Shore-D(GB/T 531-1999) 50-65

Work Temperature℃ -40~90

Instructions for use

Surface cleaning : clean surface: remove the rust, dirt, water and oil etc..

Sizing : cut a small hole in the beak suitable rubber barrel, glue mouth diameter should be considered sizing width and decide, into the glue gun start sizing operation.

Bottom : to be with the back glass processing agent uses the specified. Glass processing agent to wait for the volatile drying time routine for 10-30 minutes, depending on the specific time when the environment temperature and decide, after the primer coating evaporation drying after the start of sizing.

Curing : a large temperature and humidity environment on polyurethane adhesive surface drying and curing effect, low temperature, curing slow; temperature and humidity is too high, dry too fast. The best operating environmental conditions: temperature 20 to 30 DEG C for 50 ~ 70%RH, humidity exceeds 5 to 35 DEG C; the temperature, humidity 35 ~ 75%RH range please careful construction.

Polyurethane adhesive in sizing and curing process, avoid contact with chemicals containing hydroxyl, amino and, this kind of material will cause the polyurethane glue curing incomplete.

Storage : unused plastic blocks should be tightened immediately, to seal the tube mouth save. Again, if sealed, a little crust, remove immediately after, does not affect the normal use. In the process of storage, the nozzle may also appear a few crusts, remove afternormal use, does not affect the product performance.

The matters needing attention

Keep away from children.

If you accidentally come in contact with the skin, wipe in the curing a cloth before class, and using alcohol solvent scrubbing.

If the case of contact with eyes, rinse immediately with water, and medical treatment.

Recommended for use in a well ventilated place

Product safety data please refer to the product MSDS.




Store in cool and dry place 5-25 C

Storage period: hard pack for 9 months.