|Place of Origin:||CHINA|
|Minimum Order Quantity:||1000 PCS|
|Packaging Details:||310ml/ 25kg|
|Delivery Time:||15 DAYS|
|Supply Ability:||200 TON|
|Density (25â,55%R.H):||G/ml 1.25||Skin Over Time (25â,55%R.H):||Min 10|
|Viscosity At 25â:||MPa.s Non Applicable||Hardness:||Shore A 40|
|Elongation At Break:||300%||Tensile Strength:||MPa 1.80|
|Shear Bond Strength:||MPa 1.20||Temperature Range:||-40â-+250â|
|Volume Resistivity:||Î©Â·cm 2Ã1015||Dielectric Strength:||KV/Â·mm 18|
electrical potting compound,
silicone sealing compound
9060(906B) Black silicone potting compound for electronics
1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY
1.1 Product Name: 9060 RTV Silicone Adhesive / Sealant
1.2 Former Name: 906B RTV Silicone Adhesive/Sealant
1.3 Chemical Classification: Silicone elastomer
1.4 Recommended Product
Usage and Limited Use:
Adhesive or sealant
1.5 Company Details
Manufacturer/Supplier: Guangzhou Huitian Fine Chemical Co. Ltd
Address: 6 Qibei Road, Huagang Ave., Huadu District, Guangzhou, China
Email address for Material
Safety Data Sheet
Customer Service Tel. +86-20-36867996 Fax.+86-20-36867991
2 HAZARDS IDENTIFICATION
2.1 Hazard Classification: Serious eye damage/eye irritation.
2.2 Label Elements Including
Signal Word: Warning.
Hazard Risk Statement: Causes serious eye irritation.
Precautionary Statement: Wear eye/face protection.
Wash hands thoroughly after handling.
Use only outdoors or in a well-ventilated area.
IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue
IF ON SKIN: Wash with plenty of soap and water.
If eye irritation persists, get medical advice/attention.
2.3 Other hazards None known.
3.1 Chemical Characterization: Mixture.
3.2 Hazardous Ingredients
CHEMICAL NAME CAS No. %(W/W)
Methyltri(ethylmethylketoxime)silane 22984-54-9 < 10
Vinyltri(methylethylketoxime)silane 2224-33-1 < 10
N-(2-aminoethyl)-3-aminopropyltrimethoxysilane 1760-24-3 < 3
Dibutyltin diacetate 1067-33-0 < 1
Methylethylketoxime 96-29-7 < 1
4 FIRST AID MEASURES
4.1 Description of First Aid
On contact with eyes: Flush with plenty of water at least 15 minutes, and get medical
attention if irritation persists.
On contact with skin: Wipe off, and then flush with water.
If inhaled: Remove to fresh air.
On ingestion: Get medical attention.
4.2 Important Symptoms and
Causes serious eye irritation.
4.3 Personal Protection for First
Aid or Rescue Personnel
Respiratory Protection: Use self-contained breathing apparatus or other supplied-air
Eye Protection: Use full face respirator.
Skin Protection: Washing at mealtime and end of shift is adequate.
5 FIRE- FIGHTING MEASURES
5.1 Suitable extinguishing
On large fires use dry chemical powder, foam or water sprays
(fog). On small fires use carbon dioxide, dry chemical powder or
5.2 Unsuitable extinguishing
5.3 Hazards during fire fighting: None known
5.4 Hazardous combustion
Thermal breakdown of this sealant during fire or very high heat
conditions may evolve the following decomposition products
silica (SiO2), carbon oxide and traces of incompletely burned
5.5 Special protective
Should wear self-contained breathing apparatus (SCBA) before
extinguish fires. Decide whether to evacuate or isolate fire area:
according to local regulations. Use water spray to keep fire
exposed containers cool.