Industrial glue Request a quote

Automotive Adhesive

8960H Single component PU Sealant automotive windshield adhesive Black cream

8960H Single component PU Sealant automotive windshield adhesive Black cream

Product Details:

Place of Origin: CHINA
Brand Name: Huitian
Certification: SGS
Model Number: 8960H

Payment & Shipping Terms:

Minimum Order Quantity: 1000
Price: Negotiation
Packaging Details: 310ml
Delivery Time: 8-15 work days
Payment Terms: L/C, T/T
Supply Ability: 100 ton month

Product details

Detail Information

Appearance: Black Cream Chemical Composition: Polypropylene Oxide
Density(g/cm3) (GB/T13354-1992): 1.2 Drying Time(min): 40
Sag Degree: 0 Best Working Time: 10-35
Tensile Strength(Mpa): 6.5 Breaking Elongation(: 450
High Light:

automotive sealants and adhesives


structural adhesive automotive

Product Description

8960H Single component PU Sealant FOR windshield assembly

Technical Data Sheet

HT 8960H high-performance polyurethane adhesive is single component, black, high strength, medium viscosity and low shrink. Bond line will become elastomer after curing, has good resistance for heat , cold changed and variation of stresses. Be appropriate for pneumatic glue gun or mechanical arm to construct, excellent thixotropy, no flowing, low curing contractibility rate, get acknowledgement from auto original factory.


Auto original factory glass bonding and sealing, widely used in car, passenger car, high-speed train and other large windshield glass bonding and sealing.

Features before curing

Typical value Limits
Appearance Black cream
Chemical composition Polypropylene oxide

Density(g/cm 3 )


1.20 1.15-1.25

Drying time(min)


40 20-60
Sag degree 0
Best working time 10-35

Features after curing

Curing speed(mm/24h)


4 3-5
Tensile strength(Mpa) 6.5 ≥5
Breaking elongation(%) 450 ≥450
Tearing strength(Mpa) 25 ≥20
Shear strength(Mpa) 4.0 ≥3.0
Rigidity 55 50-65
Operating temperature(℃) -40~90


Clean surface: clean up the glueing face, eliminate rust, dust, water and greasy dirt.

Glueing: cut a proper hole on the glue tube opener, the hole’s inner diameter must on the basis of glueing width, loaded on glue gun, then start on glueing.

Base coate: should cooperate with appointed activating agent 8902 and appointed base coating agent 8906 or glass finishing agent. Base coate drying time usual is 10-30 minutes, specific time is depend on work temperature, start to glue after drying.

Curing: environmental humiture have big impact on polyurethane glue’s drying time and curing. Humiture too low, curing will slow down; humiture too high, drying will be fast. The best operating environment is: temperature 20~30℃, humidity 50~70%RH. Construction should be careful if over these data. During glueing and curing, polyurethane glue must avoid touching chemicals which contain hydroxy, amino, this metarial will lead to polyurethane glue not curing or curing is not fully.

How to store: tighten up unspent glue immediately and seal the opening to keep. Next use, the opening would have a little crust, just wipe if off use it as usual. During keeping, orifice possible have a little crust, eliminate it would not affect performance.


Store away from children.

If product touch your eyes carelessly, wipe your eyes with cloth before curing, then wash with water.

If product touch your skin carelessly, flush with water immediately.

We suggest to use it in a place with good ventilation.

The product’s safety data please read MSDS as reference.

Packing specification

Order goods: 896204, 310ml/tube, 24tube/carton.

896206, 600ml/tube, 20tube/carton

896208, 20kg/ bucket, 1 bucket/box

896209, 250kg/ bucket, 2 bucket/box

Storage requirement

Be stored in 8~28℃ cool and dry place.

Storage period:hard package is 9 months.

soft package is 6 months