|Place of Origin:||China|
|Minimum Order Quantity:||1000 pics|
|Name:||7401cyanoacrylate Adhesive||Base Material Chemical Composition:||Î±- Cyano-acrylate|
|Density (g / Cm3):||1.06||Flash Point (â):||80 ~ 93|
|Working Temperature (â):||-54-80||Full Cure Time At Room Temperature (h):||24|
cyanoacrylate adhesive glue,
screw thread locking adhesive
7401 cyanoacrylate adhesive Is a single component, medium viscosity, surface insensitive cyanoacrylate.
Suitable porous, acid and absorbent inert materials, difficult sticky materials fast, high-strength adhesive
Before solidification characteristics
Typical values range
Appearance colorless transparent liquid
Base material chemical composition α- cyano-acrylate
(GB / T2794-1995)
2 # rotor 20 rpm 100-300
Density (g / cm3) 1.06
(GB / T13354-1992)
Flash Point (â) 80 ~ 93
(SH / T0733-2004)
Gap fill (mm) 0.15
Fixed time (s)
ABS 1 ~ 5
After curing characteristics
Full cure time at room temperature (h) 24
Tensile shear strength (MPa)
(GB / T 7124-1986)
Steel 14 ~ 23
Al 2 to 11
ABS 7 ~ 15
7 to 15 Polycarbonate
Working temperature (â) -54-80
Chemical / solvent resistance
Solvent Temperature (â) have left initial strength ratio (%)
100h 500h 1000h
Leaded gasoline 23100100100
Ethylene glycol: water 23 100 100 100
Hot / wet 95% 40,827,675
In order to achieve the best bonding effect, is the surface to be cleaned before the adhesive stick back to the days 7755 recommended to improve the cleaning effect of the cleaning agent to remove oil, impurities and dried. Try to expose a fresh surface grinding. Glue evenly applied to be part of sticky, immediately close the alignment, plus beat together. Excess glue before curing can not dissolve with acetone or ethyl acetate, to clean up.
This product is the best adhesive gap is less than 0.05mm effect.
To ensure the system to achieve optimal bonding strength, and the best layer resistance to media performance, it is recommended curing time in more than 24 hours to ensure complete curing adhesive layer.
Store away from children.
This product contains α- ethyl cyanoacrylate, the eyes have a stimulating effect on the skin. Recommended for use in a well-ventilated place.
In case of contact with eyes and skin, immediately rinse with water.
Product safety information, please refer to the product MSDS.
Best stored at 3-8 â cool dry place.
Storage period of 12 months.