Industrial glue Request a quote

Industrial Adhesive Glue

1428 High performance structural bonding acrylic adhesive for electronics ABS , PVC , PU , glassfiber

1428 High performance structural bonding acrylic adhesive for electronics ABS , PVC , PU , glassfiber

Product Details:

Place of Origin: China
Brand Name: Huitian
Certification: ISO/SGS
Model Number: 1428

Payment & Shipping Terms:

Minimum Order Quantity: 100 tubes
Price: Negotiation
Packaging Details: 50ml/ Double tube, 12 double tube /carton. 142183, 380ml/ double tube, 12 Double tubes /carton
Supply Ability: 1000 tubes per day

Product details

Detail Information

Component A: White Component B: Blue
Density A: 0.97 Density B: 1.13
Mix Ratio By Weight (A:B): 10:1 Handing Curing Time: 6 Mins
Initial Curing Time: 30 Mins Full Curing Time: 24 H
Work Temperature: -55~121 ℃
High Light:

rtv silicone sealant


industrial strength adhesive glue

Product Description

1428 High performance structural bonding acrylic adhesive

Typical Applications

Transport vehicles, notebook computer, mobile phone and other products such as structural adhesive bonding electrons.

Bonding material: ABS, glass steel, polyester (DCPD modified) polystyrene, polyethylene ester, PVC, polyurethane, coating

Carbon steel, aluminum and stainless steel recommended HuiTian primer 1020.

Technical Data

Item Unit Typical Value
Color Component A White
Component B Blue
C omponent of Basic Materials acrylic acid
Density Component A g/cm 3 0.97
Component B 1.13
Viscosity Component A mPa*s 120000
Component B 150000
After Mixed
Mix Ratio by weight (A:B) 10:1
Handing Curing Time Min 6
Initial Curing Time Hour 0.5
Full Curing Time Hour 24
Tensile Strength After Curing Mpa 20
Elongation at break %
Hardness Shore A
Volume Resistivity Ω*cm
Dielectric Strength KV/mm
Flame Retardant Rating UL94 V-1
Work Temperature ℃ -55~121

Medium resistance

Resistance PH 3-10 acid, hydrocarbons, salt solution. Not resistant to polar solvent, acid and alkali.

Mixing Adhesive:

Through a fixed mixing ratio of the mixing nozzle mix, with manual, pneumatic or equipment gluing


Before curing is easier to clean, wipe the lotion, overflow adhesive residue available containing citric acid, terpene resin or NMP degreasing agent scrub in order to achieve the best results. If the layer has been cured, carefully will layer off, and wipe the lotion good cleaning effect.

Matters need attention

1.This product is flammable, away from heat and flame, spark store or use.

2.Not including the adhesive materials: PP, PE, POM, PTFE, copper, brass

3.All stainless steel, aluminum, mixing equipment be Teflon or PE material. Filler, pump shall not use copper or copper alloy. The sealing ring must use Teflon, Teflon coated PVC, PE/PP, VITON, NBR, chloroprene rubber or other elastic body shall not be.

4.This product is curing very fast, generates a lot of heat when mass mixing, and may be accompanied by release of gas, steam and other volatiles. Therefore, should be in every time limited quantity in mixed operation time can run out, and the adhesive thickness is controlled within 3.2mm


50ml/ Double tube, 12 double tube /carton.


1.Store it in dry and shady places at the temperature of 12~24℃ is best

2.A component Storage life: 12 months,,B component 9months

3. Could not frozen storage